SDLG Parts Filter element 381600374 suitable for SDLG MOTOR GRADER, MODEL:
G9180/G9190F/G9220F

The following are the steps to maintain a Grader Filter element:
1. Turn off the engine and allow it to cool down before attempting to remove the filter element.
2. Locate the filter element and remove the cover or housing that protects it.

3. Carefully remove the filter element from its housing. Be sure to handle it with care to avoid damaging it.

4. Inspect the filter element for any signs of damage, such as tears, holes, or excessive dirt buildup. If the filter element is damaged, it should be replaced.

5. Clean the filter element by tapping it gently to remove any loose dirt or debris. If necessary, use compressed air to blow out any remaining dirt or debris.

6. If the filter element is reusable, it should be soaked in a cleaning solution to remove any stubborn dirt or debris. Follow the manufacturer's instructions for the cleaning solution and soak time.

7. Rinse the filter element thoroughly with clean water and allow it to air dry completely before reinstalling it.

8. Reinstall the filter element in its housing and secure the cover or housing.

9. Start the engine and check for proper filter operation. If the engine does not run smoothly or there is reduced power, the filter element may need to be replaced.

10. Follow the manufacturer's recommended maintenance schedule for the filter element to ensure optimal performance and longevity.

Company Profile