Bucket Tooth 60116437P1 Suitable for Sany Excavator Truck SY245-SY365

TYPE: GENUINE
MODEL: 713Y00032RC
CATEGORY: SANY Excavator Truck Parts；SANY Parts

ORTEC is well-received for its persistant commitment to quality, and supplies a complete range of genuine parts for Sany
excavators, wide body mining truck, etc.

How to change the excavator bucket tooth?

1. The teeth should be sharp.

2. The bucket teeth on both sides of the bucket are generallv faster than the teeth in the middle of the bucket,When the teeth on both sides wear much shorter

than the middle teeth. the position of the teeth on the middle and the sides can be interchanged and continue to be used. if the difference between the tooth at

the center and the length of the tooth at both ends is 2to 3cmit should be exchanged.

3. If the difference between the tooth length of the center part and thetoothlength of both ends is 2~3cmit should be exchanged. Please replace the teeth in time.

4. Visually check the looseness and wear of the bucket teeth before daily work.if thebucket tooth wear exceeds the use limit,it will not only damage the tooth holder and the bucket,but also affect the efficiency of the excavation and reduce the output